Milling Spindle

    • High Precision, High Rigidity, High Speed, Low Vibration, High Reliability.
    • Match the different drivers of the customer and maximize the performance of the motorized spindle.
Go to product
Motorized Spindle (Electric Spindle) - Milling Spindle

Turning Spindle

    • High Precision, High Rigidity, High Speed, Low Vibration, High Reliability.
    • Match the different drivers of the customer and maximize the performance of the motorized spindle.
Go to product
Motorized Spindle (Electric Spindle) - Turning Spindle

Woodworking Spindle

    • High Precision, High Rigidity, High Speed, Low Vibration, High Reliability.
    • Match the different drivers of the customer and maximize the performance of the motorized spindle.
Go to product
Motorized Spindle (Electric Spindle) - Woodworking Spindle

4th-Axis Direct drive Rotary table

    • Direct connection to the load, Gearless, Backlashless, Low Noise.
    • High over-load capacity(4x), High speed, High servo-response.
Go to product

5th-Axis Direct drive Rotary table

    • Direct connection to the load, Gearless, Backlashless, Low Noise.
    • High over-load capacity(4x), High speed, High servo-response.
Go to product

Direct Drive Motor

    • Instead of decelerators, D.D. motors can save equipment cost.
    • With low noise, high efficiency, low speed and high torque. Raising control precision and product’s quality.
Go to product

The Complete torque motor

    • Instead of decelerators, D.D. motors can save equipment cost.
    • With low noise, high efficiency, low speed and high torque. Raising control precision and product’s quality.
Go to product

SVM Asynchronous Servo Motor

    • Above the base frequency, high-speed operation maintains constant horsepower output, and has wide-area constant power output characteristics power output characteristics.
    • Below the base frequency, a fairly smooth and linear magnetic field is maintained during low speed operation to maintain constant torque output.
Go to product

SVMA Asynchronous Servo Motor

    • Above the base frequency, high-speed operation maintains constant horsepower output, and has wide-area constant power output characteristics power output characteristics.
    • Below the base frequency, a fairly smooth and linear magnetic field is maintained during low speed operation to maintain constant torque output.
Go to product

SPM Synchronous Servo Motor

    • High precision and low inertia design, sensitive response and speed control.
Go to product

SPMA Synchronous Servo Motor

    • High precision and low inertia design, sensitive response and speed control.
Go to product

LPM Linear Motor

    • Designed with stator core to improve linear motor efficiency.
    • High-speed dynamic response and higher speed have higher moving speed and positioning accuracy than the ball screw.
Go to product

Direct Drive-Stators and Rotors

    • Designed for machine tool and other demanding application.
    • Liquid cooling channels on housing. 600 VCD bus votage. Very high continuous torque.
Go to product

Electric Bus Motor Driver (Electric Vehicle Motor)

    • Control current shock at short time(ms), When over load cause current impact.
    • Field weakening control can excellent torque output inside speed range.
Go to product

Electric Bus Traction Motor (Electric Vehicle Motor)

    • Control current shock at short time(ms), When over load cause current impact.
    • Field weakening control can excellent torque output inside speed range.
Go to product

Electric Scooter Power Traction (Electric Vehicle Motor)

    • Control current shock at short time(ms), When over load cause current impact.
    • Field weakening control can excellent torque output inside speed range.
Go to product

Products

Home Products Motorized Spindle Milling Spindle Built In Spindle BT30 / BBT30 / HSK-E40, Ø120

Built In Spindle

BT30 / BBT30 / HSK-E40, Ø120

High Precision, High Rigidity, High Speed, Low Vibration, High Reliability.

According to the customer's needs, provide the corresponding motor parameter to match the different drivers of the customer and maximize the performance of the motorized spindle.

E-catalog Inquiry
Built In Spindle BT30 / BBT30 / HSK-E40, Ø120
Built In Spindle BT30 / BBT30 / HSK-E40, Ø120
Built In Spindle BT30 / BBT30 / HSK-E40, Ø120
E-catalog Inquiry
Item
Outer Diameter
Max. Speed
Taper
Bearing
Lubrication
Preload
Driven
Position
Clamping Force
Clamping Form
Air Purge
Coolant
Taper Runout
Root of Test Bar Runout
200 mm Test Bar Runout
Balance Grade
Installed
CTS
Weight
Item BT30 / BBT30 / HSK-E40
Outer Diameter Ø 120 mm
Max. Speed 240000 RPM
Taper BT30 / BBT30 HSK-E40
Bearing Front 7009 x 2, Rare 7007 x 2
Lubrication Grease
Preload Position Preload
Driven Built-In Motor
Position Encoder
Clamping Force 2900 N 6800 N
Clamping Form BT30 Gripper HSK-A40 Gripper
Air Purge Standard
Coolant Pure Water
Taper Runout 0.002 mm
Root of Test Bar Runout 0.003 mm
200 mm Test Bar Runout 0.008 mm
Balance Grade GI ( ISO1940 )
Installed Vertical
CTS -
Weight ~40 KG
Motor Type
Mode of Operation
Kind of Connection
Voltage (V)
Current (A)
Frequency (Hz)
Shaft Speed (rpm)
Shaft Power (Kw)
Peak Power (Kw)
Torque (Nm)
Motor Type P.M
Mode of Operation S1 / 100%
Kind of Connection Y
Voltage (V) 380 380 380 380 380
Current (A) 22.7 26 27.6 28 28.6
Frequency (Hz) 400 533 600 666 800
Shaft Speed (rpm) 12000 16000 18000 20000 24000
Shaft Power (Kw) 12 12 12 12 12
Peak Power (Kw) 15 15 15 15 15
Torque (Nm) 9.5 6.5 5.8 5.2 4.8
Motor Type
Mode of Operation
Kind of Connection
Voltage (V)
Current (A)
Frequency (Hz)
Shaft Speed (rpm)
Shaft Power (Kw)
Peak Power (Kw)
Torque (Nm)
Motor Type I.M
Mode of Operation S1 / 100%
Kind of Connection Y
Voltage (V) 126 253 380 380 380
Current (A) 21 20 18 18 19
Frequency (Hz) 203 406 609 676 810
Shaft Speed (rpm) 6000 12000 18050 20000 24000
Shaft Power (Kw) 3.1 6.3 9.5 9.5 9.5
Peak Power (Kw) 9 19 28 20 20
Torque (Nm) 5 5 5 4.5 3.76

Back